Manual Programming System

NXP Partner Program Registered Horizonta

T9800 Universal Programmer

Product Specification 
  • 112 powerful universal pin drivers, extendable to 448 pins.
  • Support Security Provision Programming.
  • Powerful interface to configure the NAND and eMMC device programming. 
  • Support Memory/MCU devices with gang 4 high speed socket board solution. 
  • Real universal device programmer. 
  • Supports 1.2V Vcc Green devices.
  • Multi-linkable for gang programming.
  • Windows software with job control functions.
  • Graphical real-time statistical display.
  • Online automatic failure-cause analyses.

T9200+ Universal Programmer

Product Specification 
  • The integrated technology of T9200 is inherited from the core technology HSP (High Speed Programming) of T9600, which gains an excellent reputation on the public electronic market. T9200 is equipped with 112 universal pin drivers, supporting NOR & NAND flashes in various families, MCU (Microcontroller), and supporting Logic devices (PLD,CPLD,FPGA) by option. 
  • Full hardware and software backward compatibility with T9600 & T9800. 
    T9200 is fully compatible with all the existing socket adapters and algorithms on T9600 and T9800. Users never have to worry that their former investment in the T9600 or T9800 socket board cannot be used on T9200 or the original software settings have to be re-created on their data management system (for example TASK created).

T9100 eMMC Programmer

Product Specification 
  • Dedicated eMMC programmer.
  • Supports eMMC spec version v4.3, v4.4, v4.1, v4.5, v5.0 and v5.1. 
  • Supports Smart Mode, partition mode and clone mode. 
  • Supports Chip Erase and Quick Erase functions. 
  • Supports 3.3V, 1.8V, 1.2V eMMC devices. 
  • Supports System General eMMC image builder. 
  • Windows software interface and available "Job Control" functions. 
  • Programming speed up to 36MB per second. 
  • Gang-programmer up to 8 eMMC devices on each programmer site. 
  • High speed slave duplication through the master eMMC or MicroSD. 
  • Flexible software architecture designed to accommodate customer application.

T9600 Universal Programmer

Product Specification 
  • 112 powerful universal pin drivers. 
  • Built-in 512Mbs RAM buffer (extendable to 4Gbs).
  • Supports 1.2V VCC green devices. 
  • Multi-linkable for gang programming.
  • Pipeline throughput. 
  • Windows software with Job or task management. 
  • Universal device programming with single site socket board solution. 

SG8000 Universal/ISP Programmer

Product Specification 
  • Universal Programmer Platform.
  • On-Line or Standalone operation.
  • Single site and Gang 8 socket card design.  
  • ISP(In System Programming) programming integration. 
  • Embedded High-speed FPGA design, band Width up to 1.6Gb/Sec.
  • Advance pin driver technology for high performance programming 
  • Over-current and over-voltage protection during device programming operation.

UFS Iverta A1 Programming Kit

Product Specification 
  • Single site UFS programming solution. 
  • Support UFS spec. versions: v2.0, v2.1 and v3.0.
  • High speed Gear 1 Rate A ~ HS-Gear 3 Rate B.
  • UFS Descriptors, Attributes, Flags configuration.
  • UFS Logical Units read, write and format operation.
  • Support UFS Wipe operation.
  • UFS device part number and capacity identification.
  • Comply with USB 3.2 Gen 1 specification
  • Strong System General UFS Image Builder software to convert the customize Image File.
  • Provides Real-time statistics displays and session log report
  • High Speed performance up to Read: 428 MB/s and Write: 254MB/s
  • Compatible software task to Iveta-A4 gang socket platform

UFS Iverta A4 Programming Kit

Product Specification 
  • Gang 4 UFS programming solution.
  • Support UFS spec. versions: v2.0, v2.1 and v3.0.
  • Support UFS high speed Gear 1 Rate A ~ HS-Gear 3 Rate B.
  • Support UFS Descriptors, Attributes, Flags configuration.
  • Support UFS Logical Units read, write and format operation.
  • Support UFS Wipe operation.
  • Support UFS device part number and capacity identification.
  • Comply with UFS 3.2 Gen 1 specification
  • Gang-Programmers up to 4 UFS device on each programmer site.
  • Strong System General UFS Image Builder software to convert the customize Image File.
  • Provides Real-time statistics displays and session log report.
  • High Speed performance up to Read: 428 MB/s and Write:254MB/s
ABOUT
SG

ISO9001 Certificate 

6F,No.205-3, Sec.3, Beixin Rd., Xindian Dist.,

New Taipei City 23143, Taiwan

© 2019 by System General Limited